Netgear GS724TS-100NAS Benutzerhandbuch

Queue ID. Use the menu to select the queue to be configured.

Minimum Bandwidth. Enter a percentage of the maximum negotiated bandwidth for 

the selected queue on the interface. Specify a percentage from 0–100, in increments 
of 1. 

Scheduler Type. Selects the type of queue processing from the drop down menu. 

Options are Weighted and Strict. Defining on a per-queue basis allows the user to 
create the desired service characteristics for different types of traffic.

Weighted: Weighted round robin associates a weight to each queue. This is the 

default.

Strict: Services traffic with the highest priority on a queue first.

Queue Management Type. Displays the type of packet management used for all 

packets, which is Taildrop. All packets on a queue are safe until congestion occurs. At 
this point, any additional packets queued are dropped.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch.

If you make changes to the page, click Apply to apply the changes to the system. 

802.1p to Queue Mapping

The 802.1p to Queue Mapping page also displays the Current 802.1p Priority Mapping table. 
To display the 801.p to Queue Mapping page, click QoS 

 CoS  Advanced  802.1p to 

Queue Mapping.

 

To map 802.1p priorities to queues: 

Select the Global radio button to apply the same 802.1p priority mapping to all CoS 

configurable interfaces or select the Interface radio button to apply 802.1p priority 

mapping to on a per-interface basis.