3com Webcache 1000 (3C16115) Benutzerhandbuch

Seite von 176
Network Configuration Concepts
47
exists on your network, enter the IP address 
0.0.0.0
 or leave the field 
blank. 
If you set the default router to 0.0.0.0 or leave it blank, the Webcache 
will only be able to access devices that are in the same subnet as the 
Webcache.
Domain Name System
The Domain Name System (DNS) maps a numerical Internet Protocol (IP) 
address to a more meaningful and easy-to-remember name. When you 
need to access another device on your network, you enter the name of 
the device, instead of its IP address. A Domain Name System server on 
your network is contacted and asked the electronic form of the question, 
“What is the IP address of the destination device?”. The DNS server is a 
machine that keeps track of all the names and their equivalent numeric IP 
addresses. The DNS server responds with the correct IP address (e.g. 
128.118.2.23), allowing the two devices to communicate with each 
other.
To enable the Domain Name System, you must setup a DNS server on 
your network. If you are uncertain about how to do this, contact your 
network administrator.
The following Webcache features are only available if you have setup a 
DNS server:
Access to the Webcache by DNS Name — You can access the Web 
interface or Command Line Interface of the Webcache via its DNS 
name, rather than its IP address e.g. webcache.mycompany.com.
Web Proxy Auto-Discovery — This protocol can be used to 
configure Web browsers on client machines in a Proxy Cache 
deployment. For further information, see “Web Proxy Auto-Discovery 
(WPAD)”
 on page 53.
Domain Name System
Syntax
You must use the following syntax for the Domain Name System host 
name and domain name:
Host Name
The host name must be at least 1 character long.
The host name must not exceed 63 characters long.
The host name must be comprised of alphanumeric characters, - 
(hyphens) and _ (underscores).