3com WX3000 Benutzerhandbuch
1-9
To do…
Use the command…
Remarks
Enable LACP on the port
lacp enable
Required
By default, LACP is disabled on
a port.
a port.
Configure the port priority
lacp port-priority port-priority
Optional
By default, the port priority is
32,768.
32,768.
Displaying and Maintaining Link Aggregation
To do…
Use the command…
Remarks
Display summary information of
all aggregation groups
all aggregation groups
display link-aggregation
summary
summary
Display detailed information of
a specific aggregation group or
all aggregation groups
a specific aggregation group or
all aggregation groups
display link-aggregation
verbose [ agg-id ]
verbose [ agg-id ]
Display link aggregation details
of a specified port or port range
of a specified port or port range
display link-aggregation
interface interface-type
interface-number [ to
interface-type
interface-number ]
interface interface-type
interface-number [ to
interface-type
interface-number ]
Display local device ID
display lacp system-id
You can execute the display
command in any view.
command in any view.
Clear LACP statistics about a
specified port or port range
specified port or port range
reset lacp statistics
[ interface interface-type
interface-number [ to
interface-type
interface-number ] ]
[ interface interface-type
interface-number [ to
interface-type
interface-number ] ]
Execute the reset command in
user view.
user view.
Link Aggregation Configuration Example
Network requirements
As shown in
z
Switch A connects to Switch B with three ports GigabitEthernet 1/0/1 to GigabitEthernet 1/0/3. It is
required that incoming/outgoing load between the two switches can be shared among the three
ports.
z
Adopt three different aggregation modes to implement link aggregation on the three ports between
switch A and B.