3com WX3000 Benutzerhandbuch

 

2-28 

 

The configuration procedure for local authentication of FTP users is similar to that for Telnet users. The 

following text only takes Telnet users as example to describe the configuration procedure for local 

authentication. 

 

In the network environment shown in 

, you are required to configure the device so that the 

Telnet users logging into the switching engine are authenticated locally. 

Figure 2-2 Local authentication of Telnet users 

Internet

Telnet user

Switch

 

 

Method 1: Using local authentication scheme. 

# Enter system view. 

<device> system-view  

# Adopt AAA authentication for Telnet users. 

[device] user-interface vty 0 4 

[device-ui-vty0-4] authentication-mode scheme 

[device-ui-vty0-4] quit 

# Create and configure a local user named "telnet". 

[device] local-user telnet 

[device-luser-telnet] service-type telnet 

[device-luser-telnet] password simple aabbcc 

[device-luser-telnet] quit 

# Configure an authentication scheme for the default “system” domain.  

[device] domain system 

[device-isp-system] scheme local 

A Telnet user logging into the device with the name telnet@system belongs to the "system" domain and 

will be authenticated according to the configuration of the "system" domain. 

Method 2: using local RADIUS server 

This method is similar to the remote authentication method described in 

. However, you need to