3com WX3000 Benutzerhandbuch
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
1-7
Follow these steps to configure remote port mirroring on the destination switch:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a VLAN and enter VLAN
view
view
vlan vlan-id
vlan-id is the ID of the
remote-probe VLAN.
remote-probe VLAN.
Configure the current VLAN as
a remote-probe VLAN
a remote-probe VLAN
remote-probe vlan enable
Required
Return to system view
quit
—
Enter the view of the Ethernet
port connecting to the source
switch or an intermediate
switch
port connecting to the source
switch or an intermediate
switch
interface interface-type
interface-number
interface-number
—
Configure the current port as
trunk port
trunk port
port link-type trunk
Required
By default, the port type is
Access.
Access.
Configure trunk port to permit
packets from the remote-probe
VLAN
packets from the remote-probe
VLAN
port trunk permit vlan
remote-probe-vlan-id
remote-probe-vlan-id
Required
Return to system view
quit
—
Create a remote destination
mirroring group
mirroring group
mirroring-group group-id
remote-destination
remote-destination
Required
Configure the destination port
for the remote destination
mirroring group
for the remote destination
mirroring group
mirroring-group group-id
monitor-port monitor-port
monitor-port monitor-port
Required
Configure the remote-probe
VLAN for the remote
destination mirroring group
VLAN for the remote
destination mirroring group
mirroring-group group-id
remote-probe vlan
remote-probe-vlan-id
remote-probe vlan
remote-probe-vlan-id
Required
When configuring a destination switch, note that:
z
The destination port of remote port mirroring cannot be a member port of an existing mirroring
group, a member port of an aggregation group, or a port enabled with LACP or STP.
z
Only an existing static VLAN can be configured as the remote-probe VLAN. To remove a
remote-probe VLAN, you need to restore it to a normal VLAN first. A remote port mirroring group
gets invalid if the corresponding remote port mirroring VLAN is removed.
Configuring MAC-Based Mirroring
z
The MAC address specified for MAC-based mirroring must be a static MAC address existing in the
MAC address table.
z
You can configure MAC-based mirroring for a remote source mirroring group to implement the
MAC-based remote mirroring function.