Omega OMB-DAQSCAN-2000 Series Benutzerhandbuch

Seite von 72
 
 
Configure the Computer’s TCP/IP settings as follows. 
 
 
Make sure that each computer on the dedicated network has a unique 
IP address.  Make sure that the IP address of the acquisition device is also 
unique.  The computer and the device cannot use the same IP address.  
 
 
 
 
Internet Protocol (TCP/IP) Properties 
 
 
6.  Select the “Use the following IP Address” radio button. 
7.  Set the IP address field to 10.0.0.x where x is some number from 1 to 255. 
Make sure that each computer on the dedicated network has a unique 
IP address. 
8.  Set the Subnet mask to 255.0.0.0.  Note that the remaining fields can be left 
unchanged. 
 
6-8       Configuring the System for Operation                            
898195  
DaqLab/2000 Series & DaqScan/2000 Series