Enterasys Networks DFE-Gold Series Benutzerhandbuch
Configuring Network Address Translation (NAT)
clear router limits (NAT)
18-16 Network Address Translation (NAT) Configuration
Route Table Limit - 12000 (default)
TWCB maximum Bindings - 32000 (default)
TWCB Cache size - 2000 (default)
TWCB maximum Configs - 1 (default)
TWCB maximum Bindings - 32000 (default)
TWCB Cache size - 2000 (default)
TWCB maximum Configs - 1 (default)
This example displays the NAT cache‐size limit for this system:
Matrix(su)->show router limits nat-cache
NAT Cache size - 2000 (default)
NAT Cache size - 2000 (default)
clear router limits (NAT)
Use this command to reset NAT router limits to the default values.
Syntax
clear router limits [nat-bindings] [nat-cache] [nat-dynamic-config]
[nat-static-config] [nat-interface-config] [nat-global-addr-cfg]
[nat-global-port-cfg]
[nat-static-config] [nat-interface-config] [nat-global-addr-cfg]
[nat-global-port-cfg]
Parameters
Defaults
If no parameters are specified, all router limits are reset, including TWCB, LSNAT and route‐table
router limits.
router limits.
Mode
Switch Command: Matrix(rw)‐>.
Usage
nat‐bindings
(Optional) Specifies the resetting of NAT binding router limits to the
default value.
default value.
nat‐cache
(Optional) Specifies the resetting of NAT cache size router limits to the
default value.
default value.
nat‐dynamic‐configs
(Optional) Specifies the resetting the number of NAT dynamic mapping
configurations to the default value.
configurations to the default value.
nat‐static‐config
(Optional) Specifies the resetting the number of NAT static mapping
configurations to the default value.
configurations to the default value.
nat‐interface‐config
(Optional) Specifies the resetting the number of configured NAT VLAN
interfaces to the default value.
interfaces to the default value.
nat‐global‐addr‐cfg
(Optional) Specifies the resetting the number configurable global
addresses to the default value.
addresses to the default value.
nat‐global‐port‐cfg
(Optional) Specifies the resetting the number of configurable global
ports to the default value.
ports to the default value.
.
To clear TWCB router limits see
.
If you do not specify a parameter when issuing a clear router limits command, router limits for all
contexts are reset to the default value.
contexts are reset to the default value.