Enterasys Networks D2G124-12P Benutzerhandbuch
set ciscodp status
D-Series CLI Reference 3-9
set ciscodp status
Use this command to enable or disable the Cisco discovery protocol globally on the switch.
Syntax
set ciscodp state {auto | disable | enable}
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to globally enable CiscoDP:
D2(su)->set ciscodp state enable
set ciscodp timer
Use this command to set the number of seconds between Cisco discovery protocol PDU
transmissions.
transmissions.
Syntax
set ciscodp timer seconds
Parameters
Defaults
None.
trusted
The trust mode of the port. Default of trusted can be changed using the set ciscodp
port command.
port command.
cos
The Class of Service priority value for untrusted traffic. The default of 0 can be
changed using the set ciscodp port command.
changed using the set ciscodp port command.
Table 3-10 show ciscodp port info Output Details (Continued)
Output Field
What It Displays...
auto
Globally enable only if Cisco DP PDUs are received.
disable
Globally disable Cisco discovery protocol.
enable
Globally enable Cisco discovery protocol.
seconds
Specifies the number of seconds between Cisco DP PDU transmissions.
Valid values are from 5 to 254 seconds.
Valid values are from 5 to 254 seconds.