Enterasys Networks D2G124-12P Benutzerhandbuch
set lacp
4-38 Port Configuration
set lacp
Use this command to disable or enable the Link Aggregation Control Protocol (LACP) on the
device.
device.
Syntax
set lacp {disable | enable}
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to disable LACP:
D2(su)->set lacp disable
set lacp asyspri
Use this command to set the LACP system priority.
Syntax
set lacp asyspri value
Parameters
Defaults
None.
Admin Key
Port’s assigned key. D-Series devices provide a default admin key value of 32768 for
all LAG ports (lag.0.1 though lag.0.6).
all LAG ports (lag.0.1 though lag.0.6).
Oper Key
Port’s operational key, derived from the admin key. Only underlying physical ports
with oper keys matching the aggregator’s will be allowed to aggregate.
with oper keys matching the aggregator’s will be allowed to aggregate.
Attached Ports
Underlying physical ports associated with this aggregator.
Table 4-16 show lacp Output Details (Continued)
Output Field
What It Displays...
disable | enable
Disables or enables LACP.
asyspri
Sets the system priority to be used in creating a LAG (Link Aggregation
Group) ID. Valid values are 0 to 65535.
Group) ID. Valid values are 0 to 65535.
value
Specifies a system priority value. Valid values are 0 to 65535, with
precedence given to lower values.
precedence given to lower values.