Enterasys Networks D2G124-12P Benutzerhandbuch

clear port lacp

D-Series CLI Reference 4-45

Defaults

At least one parameter must be entered per port‐string.

If enable or disable are not specified, port(s) will be enabled with the LACP parameters entered.

Mode

Switch command, read‐write.

Usage

LACP commands and parameters beginning with an “a” (such as aadminkey) set actor values.
Corresponding commands and parameters beginning with a “p” (such as padminkey) set
corresponding partner values. Actor refers to the local device participating in LACP negotiation,
while partner refers to its remote device partner at the other end of the negotiation. Actors and
partners maintain current status of the other via LACPDUs containing information about their
ports’ LACP status and operational state.

Example

This example shows how to set the actor admin key to 3555 for port

.3.16:

D2(su)->set port lacp ge.3.16 aadminkey 3555

clear port lacp

Use this command to clear link aggregation settings for one or more ports.

Syntax

clear port lacp port port-string {[aadminkey] [aportpri] [asyspri] [aadminstate
{lacpactive | lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef
| lacpexpire | all}] [padminsyspri] [padminsysid] [padminkey] [padminportpri]
[padminport] [padminstate {lacpactive | lacptimeout | lacpagg | lacpsync |
lacpcollect | lacpdist | lacpdef | lacpexpire | all}]}

padminport
padminport

Sets a default value to use as the port’s partner admin value. Valid values
are 1 ‐ 65535.

padminportpri
padminportpri

Sets a default value to use as the port’s partner port priority. Valid values
are 0 ‐ 65535, with lower values given higher priority.

Sets a port’s partner LACP administrative state. See aadminstate for valid
options.

padminsysid
padminsysid

Sets a default value to use as the port’s partner system ID. This is a MAC
address.

padminsyspri
padminsyspri

Sets a default value to use as the port’s partner priority. Valid values are 0
‐ 65535, with lower values given higher priority.