Enterasys Networks D2G124-12P Benutzerhandbuch

clear snmp view

5-22 SNMP Configuration

clear snmp view

Use this command to delete an SNMPv3 MIB view.

Syntax

clear snmp view viewname subtree

Parameters

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to delete SNMP MIB view “public”:

D2(su)->clear snmp view public 1.3.6.1

Configuring SNMP Target Parameters

Purpose

To review and configure SNMP target parameters. This controls where and under what
circumstances SNMP notifications will be sent. A target parameter entry can be bound to a target
IP address allowed to receive SNMP notification messages with the set snmp targetaddr
command (“

set snmp targetaddr

” on page 5‐26).

Commands

show snmp targetparams

Use this command to display SNMP parameters used to generate a message to a target.

Syntax

show snmp targetparams [targetParams] [volatile | nonvolatile | read-only]

viewname

Specifies the MIB view name to be deleted.

subtree

Specifies the subtree name of the MIB view to be deleted.

For information about...