Enterasys Networks D2G124-12P Benutzerhandbuch
set spantree protomigration
6-24 Spanning Tree Configuration
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear topology change trap suppression setting:
D2(rw)->clear spantree tctrapsuppress
set spantree protomigration
Use this command to reset the protocol state migration machine for one or more Spanning Tree
ports. When operating in RSTP mode, this forces a port to transmit MSTP BPDUs.
ports. When operating in RSTP mode, this forces a port to transmit MSTP BPDUs.
Syntax
set spantree protomigration <port-string>
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset the protocol state migration machine on port 20:
D2(su)->set spantree protomigration ge.1.20
show spantree spanguard
Use this command to display the status of the Spanning Tree SpanGuard function.
Syntax
show spantree spanguard
Parameters
None.
port‐string
Reset the protocol state migration machine for specific port(s). For a
detailed description of possible port‐string values, refer to “
detailed description of possible port‐string values, refer to “