Enterasys Networks D2G124-12P Benutzerhandbuch

set spantree lp

D-Series CLI Reference 6-39

Commands

set spantree lp

Use this command to enable or disable the Loop Protect feature per port and optionally, per SID.
The Loop Protect feature is disabled by default. See “Loop Protect” on page 2. for more
information.

Syntax

set spantree lp port-string {enable | disable} [sid sid]

Parameters

For information about...

Refer to page...

clear spantree lplock

6-42

set spantree lpcapablepartner

6-42

show spantree lpcapablepartner

6-43

clear spantree lpcapablepartner

6-44

set spantree lpthreshold

6-44

show spantree lpthreshold

6-45

clear spantree lpthreshold

6-45

set spantree lpwindow

6-46

show spantree lpwindow

6-46

clear spantree lpwindow

6-47

set spantree lptrapenable

6-47

show spantree lptrapenable

6-48

clear spantree lptrapenable

6-48

set spantree disputedbpduthreshold

6-48

show spantree disputedbpduthreshold

6-49

clear spantree disputedbpduthreshold

6-50

show spantree nonforwardingreason

6-50

port‐string

Specifies port(s) on which to enable or disable the Loop Protect feature.

enable | disable

Enables or disables the feature on the specified port.

sid sid

(Optional) Enables or disables the feature for specific Spanning Tree(s).
Valid values are 0 ‐ 4094. If not specified, SID 0 is assumed.