Enterasys Networks D2G124-12P Benutzerhandbuch
show logging server
12-2 Logging and Network Management
show logging server
Use this command to display the Syslog configuration for a particular server.
Syntax
show logging server [index]
Parameters
Defaults
If index is not specified, all Syslog server information will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display Syslog server configuration information:
D2(ro)->show logging server
IP Address Facility Severity Description Port Status
-------------------------------------------------------------------------
1 132.140.82.111 local4 warning(5)
-------------------------------------------------------------------------
1 132.140.82.111 local4 warning(5)
default
514 enabled
2 132.140.90.84 local4 warning(5)
default
514 enabled
provides an explanation of the command output.
clear logging application
show logging local
set logging local
clear logging local
show logging buffer
For information about...
Refer to page...
index
(Optional) Displays Syslog information pertaining to a specific server
table entry. Valid values are 1‐8.
table entry. Valid values are 1‐8.
Table 12-36 show logging server Output Details
Output Field
What It Displays...
IP Address
Syslog server’s IP address. For details on setting this using the set logging server
command, refer to “
command, refer to “
Facility
Syslog facility that will be encoded in messages sent to this server. Valid values are:
local0 to local7.
local0 to local7.
Severity
Severity level at which the server is logging messages.
Description
Text string description of this facility/server.
Port
UDP port the client uses to send to the server.
Status
Whether or not this Syslog configuration is currently enabled or disabled.