Enterasys Networks D2G124-12P Benutzerhandbuch
Configuring RADIUS
D-Series CLI Reference 15-3
•
To specify a management level (management access authentication):
Enterasys:version=1:mgmt=level
where level indicates the management level, either ro, rw, or su.
•
To specify both management level and policy profile:
Enterasys:version=1:mgmt=level:policy=string
The undecorated format is simply a string that specifies a policy profile name. The undecorated
format cannot be used for management access authentication.
format cannot be used for management access authentication.
Decorated Filter‐IDs are processed first by the switch. If no decorated Filter‐IDs are found, then
undecorated Filter‐IDs are processed. If multiple Filter‐IDs are found that contain conflicting
values, a Syslog message is generated.
undecorated Filter‐IDs are processed. If multiple Filter‐IDs are found that contain conflicting
values, a Syslog message is generated.
Configuring RADIUS
Purpose
To perform the following:
•
Review the RADIUS client/server configuration on the switch.
•
Enable or disable the RADIUS client.
•
Set local and remote login options.
•
Set primary and secondary server parameters, including IP address, timeout period,
authentication realm, and number of user login attempts allowed.
authentication realm, and number of user login attempts allowed.
•
Reset RADIUS server settings to default values.
•
Configure a RADIUS accounting server.
Commands
show radius
Use this command to display the current RADIUS client/server configuration.
Syntax
show radius [status | retries | timeout | server [index | all]]
For information about...
Refer to page...
show radius
set radius
clear radius
show radius accounting
set radius accounting
clear radius accounting