Enterasys Networks D2G124-12P Benutzerhandbuch

show macauthentication session

D-Series CLI Reference 15-21

Use this command to display the active MAC authenticated sessions.

None.

If port‐string is not specified, MAC session information will be displayed for all MAC 
authentication ports.

Switch command, read‐only.

Changing the Reauth Period with the 

 command does not 

affect current sessions. New sessions display the correct period.

Port username 
significant bits

Number of significant bits in the MAC addresses to be used starting with the left-
most bit of the vendor portion of the MAC address. The significant portion of the MAC 
address is sent as a user-name credential when the primary attempt to authenticate 
the full MAC address fails. Any other failure to authenticate the full address, (i.e., 
authentication server timeout) causes the next attempt to start once again with a full 
MAC authentication. Default value of 48 can be changed with the set 
macauthentication significant-bits command.

Port 

Port designation. For a detailed description of possible port-string values, refer to 
“

Port State

Whether or not MAC authentication is enabled or disabled on this port.

Reauth Period

Reauthentication period for this port. Default value of 30 can be changed using the 
set macauthentication reauthperiod command (page 15-28).

Auth Allowed

Number of concurrent authentications supported on this port. Default is 1 and cannot 
be reset.

Auth Allocated

Maximum number of MAC authentications permitted on this port. Default is 1 and 
cannot be reset

Reauthentications

Whether or not reauthentication is enabled or disabled on this port. Set using the set 
macauthentication reauthentication command (page 15-26).