Enterasys Networks D2G124-12P Benutzerhandbuch
set macauthentication portinitialize
15-24 Security Configuration
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Usage
Enabling port(s) for MAC authentication requires globally enabling MAC authentication on the
switch as described in “
switch as described in “
” on page 15‐22, and then enabling it on a port‐by‐
port basis. By default, MAC authentication is globally disabled and disabled on all ports.
Example
This example shows how to enable MAC authentication on
ge
.2.1 though 5:
D2(su)->set macauthentication port enable ge.2.1-5
set macauthentication portinitialize
Use this command to force one or more MAC authentication ports to re‐initialize and remove any
currently active sessions on those ports.
currently active sessions on those ports.
Syntax
set macauthentication portinitialize port-string
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to force
ge
.2.1 through 5 to initialize:
D2(su)->set macauthentication portinitialize ge.2.1-5
enable | disable
Enables or disables MAC authentication.
port‐string
Specifies port(s) on which to enable or disable MAC authentication. For a
detailed description of possible port‐string values, refer to “
detailed description of possible port‐string values, refer to “
port‐string
Specifies the MAC authentication port(s) to re‐initialize. For a detailed
description of possible port‐string values, refer to “
description of possible port‐string values, refer to “