Enterasys Networks D2G124-12P Benutzerhandbuch

set pwa

D-Series CLI Reference 15-59

Use this command to enable or disable port web authentication.

set pwa {enable | disable}

None.

Switch command, read‐write.

PWA Logo

Whether the Enterasys Networks logo will be displayed or hidden at user login. 
Default state of enabled (displayed) can be changed using the set pwa displaylogo 
command as described in “

PWA Guest 
Networking Status

Whether PWA guest user status is disabled or enabled with RADIUS or no 
authentication. Default state of disabled can be changed using the set pwa 
gueststatus command as described in “

PWA Guest Name

Guest user name for PWA enhanced mode networking. Default value of “guest” can 
be changed using the set pwa guestname command as described in “

PWA Guest 
Password

Guest user’s password. Default value of an empty string can be changed using the 
set pwa guestpassword command as described in “

PWA Redirect Time

Time in seconds after login success before the user is redirected to the PWA home 
page.

Port

PWA port designation.

Mode

Whether PWA is enabled or disabled on his port.

Auth Status

Whether or not the port state is disconnected, authenticating, authenticated, or held 
(authentication has failed). 

Quiet Period

Amount of time a port will be in the held state after a user unsuccessfully attempts to 
log on to the network. Default value of 60 can be changed using the set pwa 
quietperiod command as described in “

MaxReq

Maximum number of log on attempts allowed before transitioning the port to a held 
state. Default value of 2 can be changed using the set pwa maxrequests command 
as described in “

enable | disable

Enables or disables port web authentication.