3com 10014917 Benutzerhandbuch
24
3Com Switch 4200G Family
Command Reference
mac-address
Use the
mac-address
command to add/modify the MAC address table entry.
System view
Port view
Web command: Port -> Administration
mac-address max-mac-count
Use the
mac-address max-mac-count
command to configure the maximum number of MAC addresses an
Ethernet port can learn.
Ethernet Port view
mac-address max-mac-count 0
Use the
mac-address max-mac-count0
command to disable a switch from learning MAC address in a
VLAN.
VLAN view
mac-address multicast interface vlan
Use the
mac-address multicast
command to add a multicast MAC address entry.
System view
mac-address multicast vlan
Use the
mac-address multicast vlan
command to add a multicast MAC address entry.
Ethernet Port view
mac-address security
Use the
mac-address security
command to add Security MAC address manually.
Ethernet Port view
System view
mac-address timer
Use the
mac-address timer
command to set the aging time for dynamic MAC address entries.
System view
mac-authentication
Use the
mac-authentication
command to enable centralized MAC address authentication globally (current
device) or on specified ports.
System view
Ethernet Port view
mac-authentication authmode
Use the
mac-authentication authmode
command to set MAC address authentication mode.
System view
mac-authentication authpassword
Use the
mac-authentication authpassword
command to set a password for MAC address authentication
when the fixed mode is adopted.
System view
mac-authentication authusername
Use the
mac-authentication authusername
command to set a user name when a switch authenticates
users in fixed mode.
System view
mac-authentication domain
Use the
mac-authentication domain
command to configure an ISP domain for centralized MAC address
authentication users.
System view
mac-authentication timer
Use the
mac-authentication timer
command to configure the timers used in centralized MAC address
authentication.
System view
management-vlan
Use the
management-vlan
command to specify the management VLAN on the switch.
System view
management-vlan synchronization enable
Use the
management-vlan synchronization enable
command to enable the management VLANs of the
member devices of a cluster to be synchronized.
Cluster view
mdi
Use the
mdi
command to set port MDI attribute.
Ethernet Port view