3com 10014917 Benutzerhandbuch

3Com Switch 4200G Family

 

27

 

Command Reference

ntp-service multicast-server

Use the 

command to configure an Ethernet switch to operate in NTP 

multicast server mode.

ntp-service reliable authentication-keyid

Use the 

 command to specify an authentication key to be 

a trusted key.

ntp-service source-interface

Use the 

command to designate an interface to transmit NTP message.

ntp-service unicast-peer

Use the 

 command to be an active NTP peer.

ntp-service unicast-server

Use the 

command to configure an Ethernet switch to operate in NTP server 

mode.

open

Use the 

 command to establish a control connection with an FTP server.

packet-filter

Use the 

command to define the packet filter function in the QoS profile.

packet-filter

Use the 

 command to apply ACL rules on the port to filter packets.

parity

Use the 

 command to set the check mode of the user interface.

passive

Use the 

command to set the data transmission mode to be passive mode.

  

password

Use the 

command to configure or change the system login password for a user.

password

Use the 

 command to set a password for the local users.

peer-public-key end

Use the 

 command to return to system view from public key view.

ping

Use the 

 command to check the IP network connection and the reachability of the host.

  

port

Using the 

 command, you can add one port or one group of ports to a VLAN.

port access vlan

Use the 

command to assign the access port to a specified VLAN.

port hybrid protocol-vlan vlan

Use the

 command to deliver specified protocol-based VLANs to a port.