Enterasys Networks 6H3xx Betriebsanweisung

In this example, Switch 1 (S1) has already been configured with a default VLAN 0001 associated 
with Filter Database Identifier (FDB ID) 0001 as the Port VLAN Identifier (PVID) on all ports. 

The following additional steps are required to configure the switch to solve this problem. 

1. Define a new VLAN (VLAN ID 2) using the Static VLAN Configuration screen.

2. Create a Layer 2 rule to associate the protocol AppleTalk 809B and 80F3 to VLAN ID 2 (VID 2) 

using the VLAN Classification Configuration screen. This rule is assigned to all ports.

3. Enable the dynamic egress control on VLAN 2 using the Network Tools command 

(dynamic_egress enable 2). 

With the above configuration, an AppleTalk frame received on any port will be classified into 
VLAN 2 (the AppleTalk VLAN), and the Port VLAN List of that port is updated to include 
VLAN 2. 

For instance, if Port 1 or 2 is connected to a new AppleTalk user, the AppleTalk frames received on 
that port are dynamically associated with VLAN 2 and VLAN 2 is added to the Port VLAN List of 
that port. The Port VLAN List contains a list of all VLANs whose frames can be transmitted out 
that port.

In this example, the AppleTalk traffic is routed only to AppleTalk users (Ports 1, 2, 5, and 6), while 
IP traffic is allowed to be seen by IP users (Ports 3, 4, and 7) and by IP/AppleTalk users (Ports 1, 2, 
5, and 6).

The done, quit, or exit command enables the user to exit from Network Tools 
and return to the Main Menu screen.

done, quit, or exit

None

-> done 

Connection closed