EMC DS-32B2 Benutzerhandbuch

Set ESD skip ports list.

diagesdports [list | -show]

Admin

Use this command to set the ESD IDLE PORTS list. The list is saved in 
nonvolatile memory and stays in that mode until the next execution 
of 

diagesdports

.

The ESD IDLE ports are used by several of the functional test 
methods to disable testing on the specified list of ports when ESD 
mode is enabled (see 

setesdmode

). The exact type of port list and the 

exact use of this list are determined by each test method.

The mode becomes active as soon as this command is executed. It 
does not require a reboot to take effect.

This command has the following operands:

switch:admin> diagesdports 1-3

ESD Idle Port list is now 1-3.
Config update Succeeded
switch:admin> diagesdports -show
ESD Idle Port list is 1-3.

diaghelp

Specify a valid port list. This must be a list of 
ports seperated with commas (for example, 2, 3, 
4, 5, 6), or a range of ports indicated with a 
hyphen character (for example, 2-6). This 
operand is optional.

-show

Specify this operand to display ESD idle ports 
list. This operand is optional.