Extron electronic MGP 464 DI Benutzerhandbuch

. 

Repeat step 4 for every input on the matrix switcher that will be displayed 

on the output screen via the MGP, saving the settings for each input as Input 

Preset 2, 3, etc.  

N

. 

Synchronize the MGP 464 to the matrix switcher as follows:
a

.  Open the Windows-based control software.

.  From the Tools menu, select Sync MGP 464 to Matrix Switcher... .  The 

Sync MGP 464 to Matrix Switcher window opens.

.  In the IP Address field, enter the matrix switcher’s IP address.

.  Click Connect To Matrix button.  The switcher’s matrix size is displayed 

to the right of the button, and its input-output ties are displayed in the 

Matrix Status section below.

.  From the drop-down menu in the MGP 464 Input #1 field, select the 

number of matrix switcher output to which you connected the MGP’s 

input 1 in step 1.

  Repeat step e for MGP inputs 2 through 4, making sure to select the 

number of the switcher’s output connector to which you attached the  

MGP input with which you are working.

.  Click Take to tie the MGP inputs to the selected switcher outputs.

.  Click Close to close the Sync MGP to Matrix Switcher window.