Sony 4-296-436-11 (2) Benutzerhandbuch

II-10

Setting Wipes

  Cha

p

te

r 2  

V

ideo

 S

witc

h

in

g

Press the AUX 1 bus delegation button.

Select a PGM in the PGM cross-point buttons.

Select the signal you want to mix in the PST/KEY 
cross-point buttons.

Execute the transition using the fader lever, CUT 
button, or AUTO TRANS button.

Aux1 and Aux2 settings are not stored in snapshots.

A wipe is a transition effect that switches to the next video 
by applying an effect that removes the program output 
video in a manner that appears as it is being wiped off with 
the video to be output next.
With this unit, you can make the following settings.
• Selecting the Pattern and Direction for Wipes (page 

• Making Detailed Adjustments to Wipe Patterns (page 

• Adding the Edge to the Wipe Pattern (page II-12)

This section describes wipe effects and basic operations 
for wipes.
Wipe settings are made in the [Effect] menu.

The [Effect] menu does not appear in 3D mode.

Select the video for program output.

r

Select the next video for output.

r

Press the EFF transition type selection button.

r

Set the transition type to [Wipe]. 

r

Select the pattern and direction for the wipe.

r

Make detailed adjustments to the wipe pattern if necessary.

r

Execute the transition.