Fujitsu XG0448 Benutzerhandbuch
XG0448 Hardware Guide
Chapter 2 Installation
Installation
32
2.
Put rack mounting brackets on the switch using M3 Countersunk Screws (Qty 8).
Two ways below are possible for putting on rack mounting brackets.
Precautions
When putting on rack mounting brackets, make sure to use special screws included in the 19” rack brackets set. If other
screws are used, it may break. Also, make sure to use cross slot screwdriver corresponding to the screw thread.
screws are used, it may break. Also, make sure to use cross slot screwdriver corresponding to the screw thread.
3.
Fix the switch that rack mounting brackets are put at the procedure 2.
Precautions
Pre-occupied devices in the upper and/or lower row of the rack may interfere with the power cable of the switch from
being properly installed. In that case, plug the power cable to the switch before install it in the rack.
being properly installed. In that case, plug the power cable to the switch before install it in the rack.
M3 Countersunk
Screws
Screws
Rack Mounting Brackets
M3 Countersunk
Screws
Screws
[STANDARD]
[OFFSET]
Rack Mounting Brackets
Installation screw