Fujitsu FD-1016AT Benutzerhandbuch

 

6 

 

 
●  When using a mouse with a scroll function such as a mouse with PS/2 wheel, scrolling 

outside of the support sometimes does not function properly. Also, the scroll mice may 
fail to function properly depending on the software used. 

●  The keyboard and mouse connectors are the same shape. Be sure the colors match to 

connect them correctly. If they are forced in or connected incorrectly, the switch device 
may not only function improperly but also may malfunction. 

●  Set up the console’s keyboard and mouse with each server correctly. If they are not set 

correctly they will not operate normally. 

●  Hook up the cables for each port to the same server. If the monitor, keyboard, and 

mouse port numbers are wrong, you will not be able to select the server correctly. 

●  A DVI (Digital Video Interface) compatible display can not be connected. 
●  When connecting a monitor other than the one for Console Drawer, use one that is 

multi-scan compatible, and set the correct resolution. KVM Switch supports a 
resolution of 1600 x 1200 with a refresh rate of 75 Hz. Also, the display may be off 
center after switching depending on the monitor and resolution settings. Adjust the 
monitor or video card if this happens. 

●  Degradations in high resolution screen quality, such as ghosts or blurring, may be due 

to the monitor cable or video card. Also, the screen may not display normally 
sometimes, depending on the particular combination of display and video card. Try 
changing the settings of the environment in which the video card, for example, is 
connected. 

●  The monitor cable connector is a Mini D-SUB 15P type. Make sure you connect it in 

the correct orientation and use the fixing screws to hold it in place. It may cause trouble 
if it is not connected properly. 

●  Cascaded connections must be setup exclusively with our KVM switches only. You can 

not make these connections with switches produced by other manufacturers. 

●  A maximum of two levels of cascaded connections are allowed (including the ma

ster). 
Attempting to cascade three or more levels will not work. 

 

 
This device is manufactured with metal and plastic parts. Dispose of it according the 
relevant government regulations. 
 

 
 

When moving the Console Drawer to a different location, use 
the box in which it was purchased or a box that protects the 
product from bumping and shaking. Do not unpack the Console 
Drawer until the move has been completed.