Fujitsu FD-1008AT Benutzerhandbuch

 

13 

 

 

Read the Console Drawer manual before connecting the cables. Do 
not connect or remove the cables during a thunderstorm. When 
unplugging cables hold them by the plug, not the cable. Connect and 
remove cables in the following order. 

 

 

●  Getting started 

Then confirm that the power cable for each server is plugged into an electric o
utlet and that the power is off. (Confirm connection (1)) 

 

●  Connect the servers 
2.1 When using one level KVM Switch (using only one switch device) 

It is possible to hook up a maximum of 8 servers. 

 

1) 

Connect the first server’s keyboard, mouse connector and CRT connector with 

the special cable (connect (2)), next connect the switching device’s Mini D-Sub 
15 pin (female) to the special connector (black). (connect (3)). Use the fixing 
screws to hold the Mini D-SUB15Pin in place.

 

2) 

Connect hosts 2 through 8 in the same manner. 

 

 

3.1 Connect the monitor cable and keyboard/mouse cable to the keyboard and mouse 

connectors. (connect (4)) Note: Do not connect the cables to the connectors 
marked with an x.

 

 
4. Connect the power cable

 

4.1 Connect the power cable to the Console Drawer. Next, connect the power cable to an 

earthed power supply outlet. 

 
 
 

When connecting the connector (Mini D-SUB 15Pin) for the monitor, use 
the fixing screws to securely connect the connector to the Console Drawer 
and server. Otherwise, images may be distorted.