Fujitsu FD-1008AT Benutzerhandbuch

 

27 

 
How to switch the server on the OSD screen 
Switching in Hot Key Mode A 
 
The following OSD screen is displayed if you enter Hot Key Mode A after pressing the 

Hot-Key SW, <Ctrl>+<Alt>+<Shift> keys at the same time, and pressing the <Scroll Lock> 
key twice. 

 
 
 
 
 
 
 
 
 
 
 
 
 

Example of Hot Key Mode A indication in a cascaded connection 

 
 
a. [Switching Via Keyboard] 
1) Use the <↑><↓> cursor keys to select the channel of the server No. on the left side of 

the OSD screen. 

2) If a cascade-connected channel is selected, the state of the selected slave device is 

shown on the right side of the OSD. 

3) If a cascade-connected channel is selected, pressing the <→> cursor key causes 

control to switch to the right (slave) side of the OSD, with the currently selected 
cascaded host shown in purple. Press the <←> cursor key to return control to the left 
(master) side of the OSD. 

4) On the right side of the OSD, use the <↑> & <↓> cursor keys as before to select a 

cascaded host (channel). 

5) Press the <Enter> key to actually effect the console switch to the selected server. The 

name of the server switched to is shown at the top-left of the screen for about 3 seconds 
after the switch is effected.   

 

 

If ports 1 to 8 are selected when using a 16-port KVM Switch, ports 9 to 16 
are displayed by the <Page Down> key. Ports 1 to 8 are switched to by the 
<Page Up> key.