Fujitsu FD-1008AT Benutzerhandbuch

 

5 

 
●  Only licensed personal can uncouple, remove or switch parts (such as 

electro-magnetic wave devices) which bear a warning mark (such as a lightening bolt). 

●  Only the resolution and refresh rate specified in the monitor explanation in [Technical 

Specifications] can be used as incorrect settings may damage the monitor. Contact 
your place of purchase or a Fujitsu maintenance person if you have any questions. 

●  To prevent interference it is necessary to adequately isolate the data cables connected 

to peripheral equipment. 

●  Unplug the power plug from the grounded power outlet if there is a power outage. 
●  Follow the instructions in the appropriate section in [Operation] when cleaning server. 
●  Do not use the Console Drawer as a foot rest or lean against it with it drawn out. Doing 

so may unbalance the rack, causing it to fall over. 

●  Keep this manual handy for reference with the Console Drawer at all times. 
 
 

 

Read the “Safety Instructions” before use to ensure proper use of this product. Safety 

Instructions contained in this section are written for the user to avoid any damage to 
property or self-injury. Please read the following carefully: 

 

●  Verify that the power to the server is off before handling any connectors. Also, be sure 

to discharge any static electricity. Connecting or disconnecting the connectors while 
carrying a static charge or while the power to the server is on may damage the server 
or this device. Note that damage of this kind is not covered by the warranty. 

●  Only PC/AT compatible servers can be hooked up to this device, and each server must 

be equipped with the following type of keyboard, mouse and monitor connectors. Other 
types are not supported. Additionally, a PS/2 keyboard and mouse can not be 
connected at the same time as a Sun keyboard. 

Compatible PC/AT connectors: 

- Mini DIN 6P female (1 each for PS/2 keyboard and PS/2 mouse) 
- USB A-type connector 
- Mini D-SUB 15P female (monitor) 

●  Connecting the server requires special optional cables (for PS/2, and 1.8 m, 3 m and 5 

m USB cables). The maximum cable length is 5 meters. Use a 1.8 meter cable for 
cascaded connections. Please note that cables longer than specified are not covered 
by the warranty. 

●  Use of standard equipment is recommended because special keyboards 

(programmable, wireless) and mice (wireless or that require a special driver) may not 
be supported/operate 

●  The keyboard connector for this switch device is a PS/2 type (Mini DIN 6P female), but 

you can connect an AT-type (DIN 5P male) keyboard by using a PS/2 <-> AT adapter. 
A USB type keyboard may not be used as the console keyboard. 

●  The mouse connector for the switch device is exclusively for PS/2 connection (Mini DIN 

6P female). A serial or USB-type mouse may not be used as the console mouse.