Asante Technologies 8000 Benutzerhandbuch
Advanced Management
Page 4-28
Current Settings
Table 4-6 describes each setting on the
Table 4-6 describes each setting on the
VLAN Group Static Configuration
Menu screen.
Table 4-6 VLAN Group Static Configuration Settings
Creating a VLAN
To create a VLAN, you must first find a free VLAN index. From the VLAN
Group Static Configuration Menu, type d. This displays a list of all the
VLAN indexes and VID’s that are currently in use. Decide on the index and
VID you want to use for the new VLAN.
To create a VLAN, you must first find a free VLAN index. From the VLAN
Group Static Configuration Menu, type d. This displays a list of all the
VLAN indexes and VID’s that are currently in use. Decide on the index and
VID you want to use for the new VLAN.
To create the VLAN:
1
Type s to select a VLAN, and then enter the VLAN index
you decided to use. You will notice that the VID for an
unused VLAN is 0000.
you decided to use. You will notice that the VID for an
unused VLAN is 0000.
2
Type c to create the new VLAN and enter the VID you
decided to use.
decided to use.
3
Enter a name for the VLAN.
Setting
Description
VLAN Index
The VLAN Index of the VLAN group for which the informa-
tion on the screen applies. The index is maintained by the sys-
tem, and is not necessarily the same as the VID.
tion on the screen applies. The index is maintained by the sys-
tem, and is not necessarily the same as the VID.
Port List
Shows each port’s current membership status for this VLAN
group.
group.
VID
VLAN ID.
FID
Filtering ID.
Created By
Creator of this VLAN group; either Mgmt or GVRP.
Mgm Access
Whether management access is currently enabled or disabled.
Name
The name arbitrarily assigned to the VLAN group.
Status
Whether the VLAN group is active or inactive, and whether
independent learning or shared learning of addresses is enabled.
independent learning or shared learning of addresses is enabled.