HP (Hewlett-Packard) 6308M-SX Benutzerhandbuch

Seite von 4
Copyright 2000 
Hewlett-Packard Company 
All rights reserved. Reproduction, adaptation or 
translation without prior written permission is 
prohibited, except as allowed under the copyright 
laws. 
Publication number 
5969-2364 
December 2000 
Applicable Products 
HP J4138A, HP J4139A, HP J4840A, HP J4841A 
Trademark Credits 
Microsoft
®
, Windows
®
, Microsoft Windows NT
®
 and 
Internet Explorer
®
 are U.S. trademarks of Microsoft 
Corporation. Netscape
®
 Navigator is a U.S. 
trademark of Netscape Communications 
Corporation. Cisco
®
 is a trademark of Cisco 
Systems Inc. 
Disclaimer 
The information contained in this document is 
subject to change without notice. 
HEWLETT-PACKARD COMPANY MAKES NO 
WARRANTY OF ANY KIND WITH REGARD TO 
THIS MATERIAL, INCLUDING BUT NOT LIMITED 
TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE. 
Hewlett-Packard shall not be liable for errors 
contained herein or for incidental or consequential 
damages in connection with the furnishing, 
performance or use of this material. 
Hewlett-Packard assumes no responsibility for the 
use or reliability of its software on equipment that is 
not furnished by Hewlett-Packard. 
A copy of the specific warranty terms applicable to 
your HP product and replacement parts can be 
obtained from your HP Sales and Service Office or 
authorized dealer. 
Warranty 
See the Customer Support and Warranty booklet 
included with the product. 
A copy of the specific warranty terms applicable to 
your Hewlett-Packard products and replacement 
parts can be obtained from your HP Sales and 
Service Office or authorized dealer. 
Safety Considerations 
Prior to the installation and use of this product, 
review all safety markings and instructions. 
Instruction Manual Symbol. 
If the product is marked with the above symbol, refer 
to the product manual to protect the product from 
damage. 
WARNING Denotes a hazard that can cause injury. 
CAUTION Denotes a hazard that can damage 
equipment or data. 
Do not proceed beyond a WARNING or CAUTION 
notice until you have understood the hazard and 
have taken appropriate precautions. 
Use of control, adjustments or performance 
procedures other than those specified herein may 
result in hazardous radiation exposure. 
Grounding 
This product provides a protective earthing terminal. 
There must be an uninterrupted safety earth ground 
from the main power source to the product’s input 
wiring terminals, power cord or supplied power cord 
set. Whenever it is likely that the protection has 
been impaired, disconnect the power cord until the 
ground has been restored. 
If your LAN covers an area served by more than one 
power distribution system, be sure their safety 
grounds are securely interconnected. 
LAN cables may occasionally be subject to 
hazardous transient voltages (such as lightning or 
disturbances in the electrical utilities power grid). 
Handle exposed metal components of the network 
with caution. 
For more safety information, see “Safety and EMC Regulatory Statements”, beginning on page v
Servicing 
There are no user-serviceable parts inside the user­
installable modules comprising the product. Any 
servicing, adjustment, maintenance or repair must 
be performed only by service-trained personnel. 
ii