HP (Hewlett-Packard) 3400CL-24G Benutzerhandbuch

    i

Release Notes: 

Version M.10.72 Software

 HP ProCurve Series 3400cl Switches

"M” software versions are supported on these switches:

Release M.10.41 supports the ProCurve Switch 3400cl-24G (J4905A), and 3400cl-48G (J4906A).
These release notes include information on the following:

■

Downloading switch software and documentation from the Web (

)

■

Clarification of operating details for certain software features (

)

■

A listing of software enhancements in recent releases (

) 

■

A listing of software fixes included in releases M.08.51 through M.10.72 (

)

3400cl switches MUST be running ROM version I.08.12 prior to loading M.10.20 or newer software. If your 
switch is using a software version earlier than M.10.10, you need to install and boot the M.10.10 software 
(included in the M.10.41 software package) to load the I.08.12 ROM version, before installing M.10.20 or 
newer. 

Downloading and booting software release M.08.89 or greater for the first time automatically enables 
SNMP access to the hpSwitchAuth MIB objects. If this is not desirable for your network, ProCurve 
recommends that you disable it after downloading and rebooting with the latest switch software. For more 
information, refer to “Enforcing Switch Security” on page 

 and “Using SNMP To View and Configure 

Switch Authentication Features” on page 

.  

Configuration Compatibility Caution:
Configuration files created or saved using version M.10.65 or higher are NOT backward-compatible with 
previous software versions. The user is advised to save a copy of the pre-M.10.65 startup-config file 
BEFORE UPDATING to M.10.68 or greater, in case there is ever a need to revert back to an earlier version 
of software.

ProCurve Switch 3400cl-24G (J4905A)
ProCurve Switch 3400cl-48G (J4906A)

✔

✔

✔

✔

ProCurve Switch 6400cl-6XG 10-GbE CX4(J8433A)
ProCurve Switch 6410cl-6XG 10-GbE X2(J8474A)

✔ 

✔

✔ 

✔