LevelOne FSW-1609TFX Benutzerhandbuch

The installation procedure for each module is the same.  

Additional information about each module is provided below. 
To install any of the modules: (Includes SC or ST type 

connectors) 
1.  Locate the module slot in the switch’s rear panel. 
2.  Using a screwdriver, undo the two screws and remove 

the dust cover on the module slot. 

3.  Holding the module component-side up and connector-

side in, gently slide the module along the guides and seat 
it in the internal connector. 

4.  Using a screwdriver, replace the two screws and tighten 

until snug.