LevelOne FSW-1609TFX Benutzerhandbuch
16
C
O NNECTING
T
HE
S
W I T C H
This chapter describes how to connect the Switch to your
Fast Ethernet network.
PC to Switch
A PC can be connected to the Switch via a two-pair Category
3, 4, 5 UTP/STP straight cable. The PC (equipped with a RJ-
45 10/100Mbps phone jack) should be connected to any of the
16 ports (1x - 16x) for the 16-Port model, 24 ports (1x - 24x)
16 ports (1x - 16x) for the 16-Port model, 24 ports (1x - 24x)
for the 24-Port model.
The LED indicators for PC connection dependent on the LAN
card capabilities. If LED indicators are not light after
The LED indicators for PC connection dependent on the LAN
card capabilities. If LED indicators are not light after
making a proper connection, check the PC LAN card, the
cable, the Switch conditions and connections.
The following are LED indicator possibilities for a PC to
Switch connection:
1. The “100M LINK/ACT, 10M LINK/ACT” LED
1. The “100M LINK/ACT, 10M LINK/ACT” LED
indicator light green for hookup to 100Mbps speed or
light amber for hookup to 10Mbps speed.
2. The “10/100M FDX, 10/100M COL LED” indicator
depends upon LAN card capabilities for full-duplex or
half-duplex.