Meridian America 61 Benutzerhandbuch

8 7

 Field Wiring Kit is used in conjunction with

the System Monitor to 

 cable. It provides the necessary hardware to

connect four 

 rectifiers to a System Monitor.

. .

System Hardware-All

 blank faceplate is required in a slot reserved for

the Ringing Generator when the Ringing Generator is not in place.
Although not required, other unoccupied slots can be covered by any of the
following blank faceplates, depending on the width of the slot:

 2.2 cm (0.875 in.) 

 2.5 cm (1 in.)

Purpose-Holds I/O cables that go from the system to the Main
Distribution Frame 

 Provides support for overhead cabling tray.

Mounts to the highest module in each column. Each kit consists of the

following:

support brackets

front and rear top cap air grills with cut-outs

Equipment identification and ordering information 553-3001-154