Moxa Technologies Moxa EtherDevice Switch Benutzerhandbuch
EDS-510A Series User’s Manual
Featured Functions
3-15
Configuring Port Trunking
The Port Trunking Settings page is used to assign ports to a Trunk Group.
Step 1: Select Trk1, Trk2, Trk3, or Trk4 from the Trunk Group drop-down box.
Step 2: Select Static, or LACP from the Trunk Type drop-down box.
Step 3: Under
Step 2: Select Static, or LACP from the Trunk Type drop-down box.
Step 3: Under
Member Ports and Available Ports, select the specific ports.
Step 4: Use
the
Up / Down buttons to add/remove designated ports to/from a trunk group.
Trunk Group (Maximum of 3 trunk groups)
Setting
Description
Factory Default
Trk1, Trk2, Trk3, Trk4 Display or designate the Trunk Type and Member
Ports for Trunk Group 1, 2, 3, 4.
Trk1
Trunk Type
Setting
Description
Factory Default
Static
Designated Moxa proprietary trunking protocol
Static
LACP
Designated LACP (IEEE 802.3ad, Link
Aggregation Control Protocol)
Aggregation Control Protocol)
Static