Minicom Advanced Systems 5UM20114 Benutzerhandbuch

 

Both require IPMI V1.5. 

From the Smart 16 IP Menu choose IPMI Settings. The IPMI Settings appears. 
See Figure 33. 

 

IPMI disabled - Disables IPMI. Status via IPMI and Event Log via IPMI are not 
available and the power on/off and reset functions won't use IPMI. 

BMC address - Hexadecimal Baseboard Management Controller address. 
Needed for all types of communication to the IPMI-interface. Usually you can 
find this address in the BIOS of the host system. The default and common value is 
20.  

IPMI over Serial - If your host system supports IPMI V1.5 and has an Intel EMP 
(Emergency Management Port, usually COM2) connector, you can connect IPMI 
through serial port 1 on Smart 16 IP. Please note:  

•  Set the EMP port to Always enable and switch off the Restricted Mode.  
•  The BMC should accept a null username and a non-null password 

account as login.  

•  Passwords are 4 -16 characters long.  
•  Use a null modem cable for connection  

IPMI over LAN - You can connect the IPMI over a LAN connection. You need a 
host system with IPMI V1.5 and a network adapter with a sideband connection to 
the BMC (mostly on board). In the IPMI Settings, enter the IP-address of this host 
system and the correct password for the LAN connection.  

You can also access other IPMI systems when you enter their IP address.