Alloy Computer Products GSM-16T2SFP Benutzerhandbuch

75 

Alloy Computer Products Pty Ltd Copyright ©2006

Used to specify the Join Time in units of 100

th

 of a Second, Valid time range is 20 

– 100. 

Default: 20 

Used to specify the Leave Time in units of 100

th

 of a Second, Valid time range is 

60 – 300. 

Default: 60 

A time period for the announcement that all registered devices are going to be 
de-registered. If a device issues a new join command, then a registration will be 
kept in the switch. Valid range is 1000 – 5000 unit time.  

Default: 1000 unit time 

Mode: 

There are two types of participant modes that are supported, normal participant 
and non-participant. 

 

The switch participates normally in the GARP protocol exchanges. This is the 
default setting.  

In this mode the switch does not send or reply to any GARP messages, it just 
listens to messages and reacts to any received GVRP BPDU. 

 

There are three types of administrative control values that can be set, they are 
normal registrar, fixed registrar and forbidden registrar. 

The Registrar responds normally to incoming GARP messages. This is the 
default setting. 

The Registrar ignores all GARP messages and all members remain in the 
registered (IN) state. 

The Registrar ignores all GARP messages and all members remain in the 
unregistered (EMPTY) state. 

 

This function is used to restrict the creation of a dynamic VLAN when this port 
receives GVRP BDU. There are two modes Enabled and Disabled. 

The dynamic VLAN will be created when this port receives a GVRP BDU. This is 
the default setting.