Airlink101 ASW324 Benutzerhandbuch

8 

19-inch equipment rack. To do this, first install the mounting 
brackets on the Switch’s side panels (one on each side), 
secure them with the included screws, and then use the 
screws provided with the equipment rack to mount the 
Switch. 
 

 
The Switch has a universal power supply ranging from 100V 
to 240V AC, 50 ~ 60Hz power source. The AC power 
connector is located at the rear of the unit adjacent to and the 
system fan. The switch’s power supply will adjust to the local 
power source automatically. 
 

 
This section describes how to connect the Switch to your 
10/100Mbps Fast Ethernet network. 

 

Your network device (i.e. computer, switch, IP Camera, VoIP) 
can be connected to any port of the Switch via a two-pair 
Category 5 Cable. If the LED indicators do not light up after 

9 

making a proper connection, check your network device, the 
cable, the Switch conditions and connections. 
 
 
 

 
 
 

E-mail: support@airlink101.com 

 

Toll-Free: 1-888-746-3238* 

 

Web Site: www.airlink101.com 

 
 
 

 
 

 

 
* Free Voice Technical Support is only available within the hardware warranty 
(1-Year Limited Warranty from the date of purchase). Customer is required to 
provide invoice as purchase evidence. 
 
**Network conditions and environmental factors as well as network overhead 
lower actual data throughput rate. 
 
Copyright © 2009 AirLink101. All rights reserved. AirLink101, the stylized 
AirLink101 logo, specific product designations, and all other words and logos that 
are identified as trademarks and/or service marks are, unless noted otherwise, 
the trademarks and service marks of AirLink101. All other product or service 
names are the property of their respective holders. AirLink101 products are 
protected under numerous U.S. and foreign patents and pending applications, 
mask work rights, and copyrights.