Sun Microsystems X4100 Benutzerhandbuch

Chapter 1

Setting Up the Server Hardware

Disassembling the Slide Rails Before Installation

Use this procedure to remove the mounting brackets from the slide-rail assemblies.

1. Unpack the slide-rails.

2. Locate the slide-rail lock at the front of one of the slide-rail assemblies, as shown

3. Squeeze and hold the tabs at the top and bottom of the lock while you pull the

mounting bracket out of the slide-rail assembly, until it reaches the stop. See

4. Pull the mounting bracket release button toward the front of the mounting

bracket, as shown in

FIGURE 1-1

, and simultaneously withdraw the mounting

bracket from the slide-rail assembly.

5. Repeat the procedure for the remaining slide rail assembly.

FIGURE 1-1

Disassembling the Slide-Rail Before Installation

Slide-rail lock

Mounting bracket
release button