Sun Microsystems X4100 Benutzerhandbuch
32
Sun Fire X4100/X4100 M2 and X4200/X4200 M2 Servers Installation Guide • May 2007
Installation Worksheet
Use the worksheet in
to gather the information you need to configure the
preinstalled Solaris 10 OS. You need to collect only the information that applies to
your application.
your application.
TABLE 1
Worksheet for Installation
Information for Installation
Description or Example
Your Answers:
Defaults are noted
with an asterisk. (*)
Defaults are noted
with an asterisk. (*)
Language
Choose from the list of available languages for the
Solaris 10 software.
Solaris 10 software.
English*
Locale
Choose your geographic region from the list of available
locales.
locales.
English (C - 7-bit
ASCII)*
ASCII)*
Terminal
Choose the type of terminal that you are using from the
list of available terminal types.
list of available terminal types.
Network connection
Is the system connected to a network?
• Networked
• Non-networked*
• Non-networked*
DHCP
Can the system use Dynamic Host Configuration
Protocol (DHCP) to configure its network interfaces?
Protocol (DHCP) to configure its network interfaces?
• Yes
• No*
• No*
If you are not
using DHCP,
note the network
address:
using DHCP,
note the network
address:
IP address
If you are not using DHCP, supply the IP address for the
system.
Example: 129.200.9.1
system.
Example: 129.200.9.1
Subnet
If you are not using DHCP, is the system part of a
subnet?
If yes, what is the netmask of the subnet?
Example: 255.255.0.0
subnet?
If yes, what is the netmask of the subnet?
Example: 255.255.0.0
255.255.0.0*
IPv6
Do you want to enable IPv6 on this machine?
• Yes
• No*
• No*
Host name
A host name that you choose for the system.
Kerberos
Do you want to configure Kerberos security on this
machine? If yes, gather the following information:
machine? If yes, gather the following information:
Default Realm:
Administration Server:
First KDC:
(Optional) Additional KDCs:
• Yes
• No*
• No*