Acer G701 Benutzerhandbuch
3 Upgrading the system
48
Upgrading the system memory
This section includes instructions for removing and installing a
memory module.
memory module.
Memory modules must be installed and removed in pairs, observing
sequential slot positions.
sequential slot positions.
To remove a DIMM
Before you can install a new DIMM in a socket, remove first any
previously installed DIMM from that socket.
previously installed DIMM from that socket.
Important: Before removing any DIMM from the mainboard,
make sure to create a backup file of all important data.
make sure to create a backup file of all important data.
1
Observe the ESD precautions and pre-installation procedures
described on page 31.
described on page 31.
2
Locate the DIMM socket on the mainboard.
3
Press the holding clips on both sides of the socket outward to
release the DIMM (1).
release the DIMM (1).
4
Gently pull the DIMM upward to remove it from the socket (2).
Note: Place your forefingers on the top of the DIMM before
pressing the holding clips to gently disengage the DIMM from the
socket.
pressing the holding clips to gently disengage the DIMM from the
socket.
AA G701 - EN.book Page 48 Tuesday, February 25, 2003 5:19 PM