Gateway 7400 Benutzerhandbuch
Memory and processor problems
111
Memory and processor problems
The system detected memory errors during start up.
The system does not recognize a new or second processor.
Probable cause
Solution
Memory was added or
removed, and the new
configuration was not saved
in BIOS Setup utility
removed, and the new
configuration was not saved
in BIOS Setup utility
Open the BIOS Setup utility and save the new
memory configuration.
memory configuration.
The memory was installed
incorrectly
incorrectly
Make sure the memory is seated and oriented
correctly.
correctly.
A memory chip is faulty
Replace the card with the faulty chip.
Third-party diagnostic programs can help
determine which chip or memory segment is
failing.
Third-party diagnostic programs can help
determine which chip or memory segment is
failing.
Probable cause
Solution
The processor was installed
incorrectly or was not seated
correctly in the socket
incorrectly or was not seated
correctly in the socket
Check the installation and make sure the
processor is fully seated in the socket. The
processor should be recognized automatically
if it was installed correctly.
processor is fully seated in the socket. The
processor should be recognized automatically
if it was installed correctly.
8508366.book Page 111 Tuesday, October 23, 2001 11:29 AM