Gateway 7400 Benutzerhandbuch

Starting the server

Before you start the server for the first time, make sure that:

■

The redundant power supply is autosensing. It automatically determines 
the voltage of the incoming power source and compensates accordingly. 

■

All cables are firmly connected to the proper ports on the back panel of 
the server.

■

Both power supply modules in the redundant power supply are turned 
on.

■

The server and monitor are plugged into an AC outlet, power strip, or 
UPS (uninterruptable power supply) and that the power strip or UPS is 
turned on.

If you have connected the system components to a power strip or UPS, 
make sure all the system components are turned off, then turn on the 
power strip or UPS.

Turn on the monitor.

Turn on the server. Make sure that the individual power buttons on the 
power supply modules are turned on. The light-emitting diodes (LEDs) 
on the front panel and on each power supply module are lit when the 
power is on.

Turn on any other components connected to the server, such as speakers, 
a printer, or a scanner. If nothing happens when you turn on the system:

■

Make sure that the power cables are securely plugged in and that 
the power strip or UPS is plugged in and turned on.

■

Make sure that the monitor is connected to the server, plugged into 
the power strip, AC outlet, or UPS, and turned on. You may also 
need to adjust the brightness and contrast controls on the monitor.

Electricity can flow from connected peripherals into the
system causing a shock. Make sure your server and
peripherals are turned off and unplugged from the power
outlet when you connect peripherals to the server.

8508366.book Page 17 Tuesday, October 23, 2001 11:29 AM