Gateway 7210 Benutzerhandbuch
Hot-plug backplane
11
Hot-plug backplane
JP5: Delay start jumper controls the spin-up sequence of the drives attached
to the backplane. If you enable delay start, the drives spin up one at a time
in order of their SCSI ID. If you disable delay start, all drives spin up
simultaneously. Set the jumper according to the table below.
to the backplane. If you enable delay start, the drives spin up one at a time
in order of their SCSI ID. If you disable delay start, all drives spin up
simultaneously. Set the jumper according to the table below.
Position
Description
On (default)
Enables delay start
Off
Disables delay start
JP5: Delay start jumper
Power connector
SCSI connector
JP6: Termination jumper
Back of the hot-plug backplane board
8505945.book Page 11 Thursday, March 9, 2000 2:13 PM