Fujitsu BX600 S3 Benutzerhandbuch
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
BX600 S3
Operating Manual
91
Ethernet I/O Blades
Port Assignment
8.9
Port Assignment of the LAN Switch Blades
For each of the ten server blade slots, connections to a maximum of 6 ports of
the onboard LAN controller and to 2 ports of the optional Gigabit Ethernet
daughter card are available in the BX600 S3 basic unit. With 4-way
server blades, the number of connections increases accordingly.
the onboard LAN controller and to 2 ports of the optional Gigabit Ethernet
daughter card are available in the BX600 S3 basic unit. With 4-way
server blades, the number of connections increases accordingly.
The LAN I/O blade in the NET1 slot is connected to port A of the onboard LAN
controller of the installed server blades. The LAN I/O blade in slot NET2 is
connected to port B of the onboard LAN controller. In the same way, the LAN
I/O blades in slots NET3 and NET4 are connected to port A and B of the gigabit
Ethernet daughter cards.
controller of the installed server blades. The LAN I/O blade in slot NET2 is
connected to port B of the onboard LAN controller. In the same way, the LAN
I/O blades in slots NET3 and NET4 are connected to port A and B of the gigabit
Ethernet daughter cards.
Figure 40: Slots for the LAN I/O blades
The installation of two LAN I/O blade in NET1 and NET2 (or NET3 and NET4)
enables redundant LAN connections to be provided for the relevant LAN con-
trollers of the server blades.
enables redundant LAN connections to be provided for the relevant LAN con-
trollers of the server blades.
V
CAUTION
●
LAN switch blades must always be installed in slots NET1 and NET3
first. This ensures that port A of the relevant LAN controller is
connected if redundant LAN connections are not used.
first. This ensures that port A of the relevant LAN controller is
connected if redundant LAN connections are not used.
●
To provide fibre channel functionality, fibre channel I/O blades must
be installed in slot NET3 and/or slot NET4, see
be installed in slot NET3 and/or slot NET4, see
Asynchronous balanced mode of Ethernet I/O blades and fibre
channel I/O blades in slots NET3 and NET4 is not permitted.
channel I/O blades in slots NET3 and NET4 is not permitted.
NET1
NET2
NET4
NET3