Fujitsu TX200 S6 Benutzerhandbuch
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
72
Operating Manual
TX200
S6
Starting up and operation
Hard disk drive indicators
Figure 16: Indicators on the 3.5 inch and 2.5 inch HDD modules
1 HDD BUSY (green)
–
Lit: HDD in active phase (drive active, drive being accessed)
–
Does not light: HDD inactive
2 HDD FAULT (orange)
(in conjunction with a RAID controller)
●
SAS server variant
–
Does not light: no HDD error
–
Lit: HDD Faulty (drive defective/needs replacing, drive failed, drive
deactivated by software or the HDD module is not correctly inserted)
deactivated by software or the HDD module is not correctly inserted)
–
Slow flashing: HDD Rebuild (the data is being restored after
changing a drive)
changing a drive)
–
Fast flashing: HDD Identify
●
SATA server variant
–
Does not light: no HDD error
–
Lit: HDD Faulty or Rebuild Stopped (drive defective and must be
replaced, a rebuild process was stopped or the module is not
correctly inserted)
replaced, a rebuild process was stopped or the module is not
correctly inserted)
–
Slow flashing: HDD Rebuild (the data is being restored after
changing a drive)
changing a drive)
–
Fast flashing: HDD Identify
1
2
2
1