Fujitsu TX300 Benutzerhandbuch
70
Options Guide
TX300 S6
HDD extension box
Accessible drives and LSD/LSP
7.4.1.1
Installing Multibay 2
When installing Multibay 2, proceed in a similar way as for installing Multibay 1.
See
See
on how to connect the SATA
cable to the DVD drive and connect the PSU adapter cable to the power cable.
Ê
Push Multibay 2 fully into bays 2 and 3 until the EasyClick rails lock in place.
Ensure that no damage is caused to the cables.
Ê
Remove the fan carrier as described in the
.
Ê
Remove the cable cover as described on
Figure 43: Connecting cables to HDD backplane of Multibay 2
Ê
Connect the connector CON.6 of the power cable to the connector X5 of the
HDD backplane (1).
HDD backplane (1).
Ê
Remove the cable tie located near connector CON.4 from the I
2
C cable.
Ê
Connect the I
2
C cable connector CON.4 to the LSP/LSD module (see the
cabling plans in the Appendix)
Ê
Connect the I
2
C cable to the connector X7 of the HDD backplane (2).
1
0