Fujitsu 2000 SERIES Benutzerhandbuch
CHAPTER 8 Chapter System Startup/Shutdown and Power Control
8.4 Automatic Partition Restart Conditions
8.4 Automatic Partition Restart Conditions
166
C122-E175-01EN
FIGURE 8.6 [ASR (Automatic Server Restart) Control] window
2. Set the automatic restart conditions.
The setting items of the [ASR Control] window are listed in the table below.
TABLE 8.7
[ASR Control] window display / setting items
Display Items /Setting Items
Contents
Number of Restart Tries
Set the generation of Timeout and the number of retries to start
the operating system, using Boot Watchdog and SVmco
Software. 0 to10 times can be set. When 0 is specified, there is
no retry. The default is five times.
the operating system, using Boot Watchdog and SVmco
Software. 0 to10 times can be set. When 0 is specified, there is
no retry. The default is five times.
Action after exceeding Restart Tries
Set the action to be performed in ‘Watchdog Timeout’ in case
Restart is repeated and exceeds the above note retry
frequency. .
There are following items are available as Action.
- Stop rebooting and Power Off: Stops the reboot and powers off
the partition.
- Stop rebooting: Stops the rebooting and stops the partition.
- Diagnostic Interrupt assert: Stops the reboot and instructs for
NMI interrupt for the partition. Tries to collect data (dump) for
investigating the cause of stopping the partition.
The default is ‘Stop rebooting and Power Off’.
Restart is repeated and exceeds the above note retry
frequency. .
There are following items are available as Action.
- Stop rebooting and Power Off: Stops the reboot and powers off
the partition.
- Stop rebooting: Stops the rebooting and stops the partition.
- Diagnostic Interrupt assert: Stops the reboot and instructs for
NMI interrupt for the partition. Tries to collect data (dump) for
investigating the cause of stopping the partition.
The default is ‘Stop rebooting and Power Off’.
Retry Counter
Displays the remaining number of retries possible.
Cancel Boot Watchdog
Cancels the operating system Boot monitoring. The default value
is the check box being Off.
is the check box being Off.
3. Check the [Cancel Boot Watchdog] check box to cancel the Boot Watchdog function.
4. Click [Apply] button.
Set the operating system Boot monitoring cancellation. Further, even though [Cancel Boot Watchdog]
check box was set to On, it changes to Off after clicking [Apply] button.
check box was set to On, it changes to Off after clicking [Apply] button.
For details on the operation of [ASR Control] window, see ‘1.3.8 [Partition#x] menu’ in “PRIMEQUEST 2000
series Tool Reference” (C122-E177).
series Tool Reference” (C122-E177).