Fujitsu MX130 S2 Benutzerhandbuch

MX130 S2

Upgrade and Maintenance Manual

63

Ê

Press the On / Off button to start up the server.

The system will detect the USB stick and the BIOS recovery process will be 
performed.

V

Do not interrupt the BIOS upgrade process after it has started. If the 
process is interrupted, the system BIOS may be permanently 
corrupted.

Ê

After completion of the flash process, shut down the server.

Ê

Open the side cover as described in section 

.

Ê

Disable BIOS recovery mode using the onboard jumpers:

I

For detailed information on jumper settings, refer to section 

.

Ê

Close the side cover as described in section 

.

The onboard RAID controller firmware is updated with the system board BIOS. 
Please proceed as described in section